Choosing the right tyre for your Myvi isn’t just about size. It affects your fuel consumption, handling, and safety.
Whether you’re upgrading or replacing your tyres, this 2025 guide covers everything you need to know, from ideal Myvi tyre sizes to recommended pressure settings and maintenance tips.
Myvi tyre size (quick answer)
Most Perodua Myvi models in Malaysia run 175/65R14 (1.3L) or 185/55R15 (1.5L). Some early 1.0L variants use 155/80R13, and certain trims/upgrades may use 195/45R16. Always confirm using the tyre placard on the driver’s door frame.
Why the Right Tyre Matters for Your Myvi
The right tyres improve safety, comfort, and efficiency. You’ll typically notice better grip on wet roads, steadier handling, and shorter braking distances.
They also influence daily comfort. A suitable tyre setup can reduce road noise and harshness—useful if you drive the Myvi often or travel long distances.
Now that the “why” is clear, let’s make sure you pick the correct size and spec.
Understanding Myvi Tyre Sizes and Specifications
Before buying, it helps to decode the tyre markings. A tyre size like 175/65R14 means:
- 175 = width in mm
- 65 = sidewall height (as a % of width)
- R = radial construction
- 14 = rim diameter (inches)
You may also see a load index and speed rating (e.g., 82H). These should match factory recommendations to maintain safety and avoid fitment issues.
Myvi tyre sizes by generation
Tyre sizes can vary by year, variant, and whether the car is running stock wheels. Here are the common factory-style sizes most owners will see:
| Myvi generation | Years | Common tyre sizes (Malaysia) |
| First Generation | 2005–2011 | 155/80R13, 175/65R14, some 185/55R15 |
| Second Generation | 2011–2017 | 175/65R14, 185/55R15, optional 195/45R16 |
| Third Generation | 2017–present | 1.3L: 175/65R14 • 1.5L: 185/55R15 |
If your Myvi has aftermarket rims, don’t assume the sizes above apply—confirm what’s currently installed and check clearance.
Recommended Tyre Pressure for Myvi
For most Myvi models, a good starting point is around 30–35 PSI (cold tyre pressure). Many stock 14–15 inch setups sit comfortably around 32 PSI (2.2 bar).
General guidelines (use the door sticker as final reference):
- 155/80R13 (early 1.0L): ~29 PSI (2.0 bar)
- 175/65R14 & 185/55R15 (most Myvi): ~32 PSI (2.2 bar)
- 195/45R16 (sportier/lower profile): up to ~35 PSI (2.4 bar)
Check your tyre pressure every two weeks or before long trips. Underinflation leads to sluggish handling and higher fuel use, while overinflation can reduce traction and ride comfort.
Essential Maintenance Practices for Myvi Tyre Longevity
Regular maintenance is vital for ensuring the tyres function optimally, thereby safeguarding passengers and prolonging the life of the tyres, which helps to reduce long-term maintenance costs.
1. Inspect and monitor tread depth
Check for punctures, sidewall cracks, bulges, and uneven wear. Tread depth matters because shallow tread reduces grip and water dispersal, increasing braking distance in the rain.
A safe tread depth is usually around 6–8mm when tyres are newer. If it reaches 1.6mm, the tyre is considered worn out and should be replaced immediately.
2. Rotate tyres regularly
Rotation helps tyres wear more evenly (front tyres often wear faster). A common interval is every 8,000 to 10,000 km, depending on your driving pattern.
3. Check alignment and balancing
Wheel alignment and balancing help prevent uneven wear and keep the car stable. As a simple rule, check about every six months, or sooner if you notice:
- Steering wheel not centred / car pulling to one side
- A vibration in the steering wheel, especially at speed
Where Can I Get Tyres for Myvi in Malaysia?
You can buy genuine Yokohama tyres for your Myvi through authorised Yokohama dealers listed on their official website. Purchasing from these authorised outlets ensures your tyres are certified, covered by Yokohama’s 5-Year Limited Warranty, and properly fitted to match your Myvi’s size and safety specifications.
FAQs
1. What is the correct tyre size for a Myvi?
Most 1.3L Myvi variants use 175/65R14, while most 1.5L variants use 185/55R15. Some early 1.0L models use 155/80R13, and certain trims/upgrades may run 195/45R16. Check the driver’s door placard to confirm.
2. What is the recommended tyre pressure for Myvi?
For most setups, 32 PSI (2.2 bar) is a common baseline, with the typical range around 30–35 PSI. Always follow the pressure shown on the tyre placard for your specific Myvi model and tyre size.
3. When should I replace Myvi tyres?
Replace tyres when tread reaches 1.6mm, or earlier if you see cracks, bulges, repeated punctures, uneven wear, or persistent vibration. Many tyres last around 40,000–60,000 km, and tyres older than six years should be replaced even if the tread looks acceptable.
4. Where can I buy certified Myvi tyres in Malaysia?
The safest option is an authorised dealer network (for example, authorised Yokohama dealers). You’ll usually get genuine products, warranty eligibility, and a correct fit based on your Myvi’s size and specifications.
